FAA, ICAO, ISO9001, CE

CTR04-AIDO Control box

CTR04-AIDO is specially designed for voltage AC input and DC output outdoor controller installation, to control and monitor aviation obstruction lighting system.

CTR04-AIDO control box employs MCU IC control technology. With a pre-programmed software, control up to 4 ways aviation obstruction lights. In case of any medium intensity beacon or any level of low intensity sidelights failure, will send alarm signal to the controller and then output to remote monitoring system.

A photocell is deployed within the controller system, which can turn on/off the system from dusk to dawn automatically, easy for maintenance and trouble shooting. Once the photocell fails, all lights in the system will be on in a safe status.

CTR04-AIDO Control box,Cold-Rolled steel sheet
CTR04-AIDO Control box,Stainless Steel SUS304

Specifications

LIGHT OUT-PUT
SPECIFICATIONS 10 Candela
Nominal Night Range >4 KM
LED Color Available Red
Vertical Divergence 10 Degree
Horizontal Out-put 360 Degree
Illumination
Ultra-bright LEDs
LED Lifespan 100,000 Hours
OPERATION
Autonomy 200 Hours
On & Off Level 70/100 Lux
Flash Pattern 40FPM
POWER SUPPLY
Power Source Solar module, mono-crystalline silicon
Solar Efficiency 13.5%
Max. Power Out-put 1.8 Watts
Battery Type High-efficiency NiMH rechargeable battery
Battery Capacity 8 AH
Battery Replacement Yes, replaceable
MECHANICAL STRUCTURE
Lens Polycarbonate, UV Stabilize
Body Die-casting Aluminum
Water-proof IP67
Weight 4.5 KG
Temperature Range -40C˚ ~ +55C˚
Dimensions 215.5mm H, 226mm Diameter
Warranty 5 years for light
2 years for NiMH battery

Features

  • Designed for AC100-240V input voltage and DC48V output obstruction lighting system
  • Control up to three medium intensity beacons and 1 level of up to 4 units of low intensity single obstruction lights, also suitable for only single or double obstruction lighting system.
  • Dry contact alarm relay for power supply, flasher, beacon, markers, photocell
  • LED indicators in control board to indicate lights, power, photocell operation status
  • Alarm relay for each sidelight level
  • Alarm relay for each beacon
  • Auto/manual mode control switch
  • Alarm signal output, easy for connecting remote alarm monitoring device
  • Combined with REDDOT PHC01photocell, which can turn on/off the system from dusk to dawn
  • Surge protedtor for input and output

Application

1 double obstruction lighting system
  • Control one low intensity double light on the top
  • Under "service+standby" system, configured transfer relay in the control box, in case of service lam failure, will transfer to standby lamp
  • In "Service+service"type, either failure will output signal to the control box
2 single obstruction lighting system
  • Control two low intensity single lightson the top
  • Under "service+standby" system, configured transfer relay in the control box, in case of service lam failure, will transfer to standby lamp
  • In "Service+service"type, either failure will output signal to the control box
1 medium intensity beacon+3 or 4 single low intensity obstruction lights
  • One medium intensity light on the top and 3 or 4 single low intensity light on 1/2 or 2/3 height of tower
  • Alarm output for each medium intensity beacon
  • Alarm output for each low intensity level

Standard

  • ICAO : N/A
  • FAA : N/A

Wiring method

Please connect the power cord according to the label instruction

"Power" - controller power input Lamp1, Lamp2, Lamp3, Lamp4 - connect to aviation obstruction light separately

Lamp1 Alarm, Lamp2 Alarm, Lamp3 Alarm, Lamp4 Alarm - output alarm terminal

Photocell - photocell control terminal

NO:1, NO:2, NO:3, NO:4 are 4 aviation obstruction light indicators individully.

Green light means working fine. Red light AL1, AL2, AL3, AL4 means corresponding light has failed.

• Please make sure all wiring job are correct. Connecting the power supply, then the controller will start to work

Download

RedDotSignal Download

Technic manual

Quick Inquiry* are required

Products Accessories

(Aviation Obstruction Light)

low intensity Aviation Obstruction Light lit up large port equipment all over the world. In 2006, through our cooperation with experienced companies in England and South Africa,...

Home | About Us | Contact Us | Distribution | Warranty Policy
© Copyright 2015 Shanghai Reddot Electronics Co., Ltd

Tel : +86 21 24282367
Mail : info@reddotsignal.com